s0017 - r04. (web) 20130507 product description features applications performance specification ns parameters specification unit operating wavelength range 1260 ~ 1360 1520~1620 nm through insertion loss (@op, top, all sop, exclude connectors) 2% < 0.4 db 5% < 0.6 10% < 0.9 polarization dependent loss < 0.05 db return loss > 45 db tapped monitoring responsivity (relative to nominal power at input port) 2% 10 ~ 23 14 ~ 26 ma/w 5% 26 ~ 59 36 ~ 65 10% 52 ~ 110 70 ~ 120 responsivity temperature dependence (@1310nm or 1550nm) < 0.3 db responsivity polarization dependence < 0.1 db pd pd dark current (@ -5v bias, 70c) 0.5g bandwidth < 10 na 2.0g bandwidth < 2.5 reverse voltage < 20 v forward current < 10 ma conditions input optical power 2% < 21 dbm 5% < 16 10% <12 operating temperature range (<85%rh, non-condensing) -5 +70 c storage temperature range (<85%rh, non-condensing) -40 +85 c fiber type corning smf-28 * excluding connectors ** the maximum il is under all states of polarization and within the full operating temperature and wavelength ranges specifed integrated tap monitor arrays itma series oplinks integrated tap monitor array (itma) is a compact, multi-channel power- monitoring device. it increases module design fexibility and effciency by signifcantly reducing the number of assembly components and facilitating fber management. itma integrates the functionality of an optical coupler and a photodiode while deliv - ering low insertion loss and low dark current with high temperature stability over a wide operating wavelength range. easily mounted on a pcb, oplinks standard 12/14-pin package provides power moni - toring for up to ten channels. applications include dwdm channel power monitor - ing, optical network switching/protection monitoring, re-confgurable optical add/drop multiplexers, and gain/attenuation monitoring in amplifer systems. oplink can provide customized designs to meet specialized feature applications. also, oplink offers modular assemblies that integrate other components to form a full func - tion module or subsystem. ? standard, 12/14-pin package easily mounted on a pcb ? 4, 8 and 10 channel confgurations ? wide operating wavelength range ? various tap ratio available ? low insertion loss and pdl ? low dark current ? high temperature stability ? dwdm channel monitoring ? optical network switch/protection monitoring ? re-confgurable optical add/drop multiplexers ? gain/attenuation monitoring in amplifer systems ? edfas and raman amplifers
46335 landing pkwy fremont, ca 94538 tel: (510) 933-7200 fax: (510) 933-7300 email: sales@oplink.com ? www.oplink.com s0017 - r04. (web) 20130507 product lines: ? mux/demux ? switching/routing ? coupling/splitting ? monitoring/conditioning ? amplifcation ? interconnect ? transmission ? hfc/rof subsystem itma ordering information mechanical drawing / package dimensions (dimension in mm) oplink can provide a remarkable range of customized optical solutions. for detail, please contact oplinks oem design team or account manager for your requirements and ordering information (510) 933-7200. electrical pin assignment pin#: common cathode assignment pin1: common cathode for ch1 & 2 pin2: anode ch 1 pin3: anode ch 2 pin4: common cathode for ch3 & 4 pin5: anode ch 3 pin6: anode ch 4 common anode assignment common anode for ch1 & 2 cathode ch 1 cathode ch 2 common anode for ch3 & 4 cathode ch 3 cathode ch 4 electrical pin assignment pin#: common cathode assignment pin1: common cathode for ch1 to 4 pin2: anode ch1 pin3: anode ch2 pin4: anode ch3 pin5: anode ch4 pin6: anode ch5 pin7: common cathode for ch5 to 8 pin8: anode ch6 pin9: anode ch7 pin10: anode ch 8 pin11: anode ch 9 pin12: common cathode for ch9 & 10 pin13: anode ch10 pin 14: not connected common anode assignment c ommon anode for ch1 to 4 cathode ch 1 cathode ch 2 cathode ch 3 cathode ch 4 cathode ch 5 c ommon anode for ch5 to 8 cathode ch 6 cathode ch 7 cathode ch 8 cathode ch 9 c ommon anode for ch9 & 10 cathode ch10 not connected electrical pin assignment pin#: common cathode assignment pin1: common cathode for ch1 & 2 pin2: anode ch 1 pin3: anode ch 2 pin4: common cathode for ch3 & 4 pin5: anode ch 3 pin6: anode ch 4 pin7: anode ch 5 pin8: common cathode for ch5 & 6 pin9: anode ch 6 pin10: anode ch7 pin11: common cathode for ch7 & 8 pin12: anode ch 8 common anode assignment common anode for ch1 & 2 cathode ch 1 cathode ch 2 common anode for ch3 & 4 cathode ch 3 cathode ch 4 cathode ch 5 common anode for ch5 & 6 cathode ch 6 cathode ch7 common anode for ch7 & 8 cathode ch 8 1) 4-ch itma 2) 8-ch itma 3) 10-ch itma no. of channel 4 channels = 04 8 channels = 08 10 channels = 10 tap ratio bandwidth package type wavelength fiber type fiber length 0.5g = 05 2.0g = 20 common anode = 1 common cathode= 2 1310/1550 = d 1310nm = 3 c+l band = e 250m bare fber = 1 900m loose tube = 2 ribbon fber = 3 0.5meter = h 1.0meter = 1 1.5meter = 5 2.0meter = 2 connector type none = 1 fc/pc = 2 fc/spc = 3 fc/apc = 4 sc/pc = 5 sc/spc = 6 sc/apc = 7 st = 8 lc = 9 mu = a integrated tap monitor array itma series 2/98 = 02 5/95 = 05 10/90 = 10 rohs: 1. itma is rohs 5 compliant (rohs permitted lead in solder exemption is applied). 2. add g to the end of the above pn for rohs 6 requirement.
|
